Step 1:

Locate a relatively flat area and drill a 31mm(1-7/32") diameter hole

This can be done with a step bit

Step 2:

With the logo side down, use the BraceWyse as a template to make an outline for removal of the foam material inside the brace

Step 3:

Remove the foam inside the outline with a small Dremel tool

Place the BraceWyse into the cavity just made

Step 4:

Secure the BraceWyse with the mounting plate and hardware provided from the outside

Alternative to Step 4:

If you prefer not using the mounting plate, attach the BraceWyse to the inside of your brace with the provided sticker. Note: for best result, avoid covering the four screws. The metal side must face human body.

Congratulations! Now please download the mobile app and take a minute to read the instruction on how to start the app and how to use the online portal.